Supraglottic  Airway  (SGA)  Placement  Checklist

• Open airway manually, measure and insert simple airway adjunct (Nasopharyngeal Airway [NPA] or Oropharyngeal Airway [OPA]). NPA should be measured from the Nares to the Tragus. OPA should be measured from the corner of the mouth to the angle of the mandible.
• Ventilate patient with bag‐valve‐mask (BVM) (attach supplemental oxygen, if available).
• If ventilations insufficient, or the patient is clearly unconscious and not breathing adequately, prepare for supraglottic airway insertion. Assure appropriate resuscitation has begun. Inspect SGA to ensure appropriate size.  Lubricate airway to facilitate passage.  Cricothyroidotomy kit should be prepared for use if SGA fails.
• Follow SOAP ME (Suction, Oxygen, Airway Assessment, Pharmacy, Plan, Monitor, and Equipment) and for induction, use ketamine (1-2 mg/kg IV/IO or 3-4mg/kg IM) if time permits and the recommended medications are available.

Inserting  the  Airway:

• Properly position head in a neutral or “sniffing” position (neck extended, as on a pillow or small blanket while lying flat) and open airway.
• Remove OPA if previously placed.
• Insert device to proper depth (may adjust later if needed for improved ventilation).
• Inflate , if applicable; inflate as per device-specific volume instructions and immediately remove syringe.
• Confirm placement with ventilation and auscultation over epigastrium, then bilaterally over chest, left lung then right lung. Get a second practitioner to double check and verify in sounds are questionable or cannot otherwise auscultate.
• Verify proper SGA placement by secondary confirmation such as capnography/capnometry or colorimetric device.
• Place orogastric tube and decompress stomach if available, and compatible with SGA device (has a port specifically for orogastric tube placement).